our services

Heater Repair

The indoor unit will blow warm air into the room until the set temperature is reached. Once the temperature is reached, the inverter compressor in the outdoor unit will slow down and eventually stop. The indoor fan will effectively stop when the indoor unit cools down to avoid a draught.

Fan Motor Replacement

The air conditioner fan motor drives the AC fan, which blows air in and out of the house. This is important for moving hot air to the outside of the building, as well as blowing cool air through the ductwork and into the rooms.

If the run capacitor was bad, you should allow the fan motor to cool. Then you can turn the unit back on and see if the motor starts and comes up to speed. If the fan fails to start or does not run at full speed, it should be replaced.

A/C Repair

AC technician performs the inspection of key components of unit like compressor, fan motor, evaporator unit, condenser unit, thermostat etc. during AC service to check for any fault. If any fault is found in the components during AC service then technician suggests a repair or replacement as required.

System Installation

Air conditioning (also A/C, air conditioner) is the process of removing heat and controlling the humidity of air in an enclosed space to achieve a more comfortable interior environment by use of powered 'air conditioners' or a variety of other methods including passive cooling and ventilative cooling.

Heat Pump Repair

Although we can technically call an air conditioner a heat pump, the term “heat pump” is generally used to refer to an HVAC system that can pump heat inside or outside. Heat pumps are machines that can pump heat in both directions—from the inside to the outside (cooling) and from the outside to the inside (heating).

If something has gone wrong with your current system, it's quite possible a repair visit may be all that's needed. ... Another important consideration is the service history of your system. Repairs make the most sense for systems that are well-maintained and relatively problem-free.

Duct Cleaning and Repair

Duct cleaning generally refers to the cleaning of various heating and cooling system components of forced air systems, including the supply and return air ducts and registers, grilles and diffusers, heat exchangers heating and cooling coils, condensate drain pans (drip pans), fan motor and fan housing, and the air.

The technician uses specialized tools to dislodge dirt and debris in the system, followed by a thorough sanitizing process to effectively “wash away” the mess. They'll then do an air filter change and a final testing of the system operation to ensure everything is back to working flawlessly.